CLICK HERE FOR FREE BLOGGER TEMPLATES, LINK BUTTONS AND MORE! »
Showing posts with label cork. Show all posts
Showing posts with label cork. Show all posts

Tuesday, July 3, 2012

Orders!

I needed something where I could physically see what orders needed to be finished. I used a 12x12 piece of cork board that I got at Staples, years ago. It came in a 4 pack, one is on my bedroom door and 2 I don't use.

For the board, all I really did was glued some Thickers on to it. I glued them instead of just sticking them on because I wasn't sure how well they'd hold up on cork over time.



Next came the push pins! I knew I wanted to make them, so I used over sized brads for 5 of them and fabric covered brads for the other 2.


The number Rub-Ons are from Daisy D and the cute little bird is from K & Company.

I bought push pins at Dollar Tree, I need 7 but I got 300 for $1. lol, close enough!

After I used the Rub-Ons, I flattened the push pins with pliers to get it as flat as possible. I put a generous amount of Glossy Accents on the top of the push pin and turned it upside down onto the bottom of the brad. I then filled the back of the brad up as much as possible with Glossy Accents. After they dried (a couple hours of drying time), I pushed them in the cork board and put Glossy accents on the tops and sides so the Rub-Ons would be sealed it and it would nice and shiny.

I did the same thing with the yellow and white pokla dot brads. I used wire cutters to cut the brad part off. I topped them with Glossy Accents also.

Saturday, June 16, 2012

Trendy Twine Storage + small tutorial

Last March I Guest Designed for the Trendy Twine Blog and received a ton of Trendy Twine for my own personal stash!

I needed a way to store them so I used wine corks. Thanks to my Dad's love for Wine, we had a bunch I could use! 

        How to do it... Part 1
  • Collect as many corks as you need
  • Tape one end of the twine to the cork
  • Wrap around like a mad man

How to do it... Part 2

I like to post what color I use when I use it, so this is very helpful for me!
  • Trace the bottom of each cork (they're all different sizes)
  • Cut out the circles
  • Write the name of the Twine on each circle
  • Use a Glue Dot to adhere it to the bottom of the cork

How to do it... Part 3
  • Get as many sewing pins as you have corks
  • Use wire cutters to cut the pins in half
  • Secure the loose end with the pin and you're done!